Artwork should be submitted as a PNG, with a transparent background, at 300ppi resolution or higher
Artwork line thickness should be at least 0.02 in. (0.5mm) or thicker. Any part of the artwork thinner than this will likely NOT print or transfer to the garment
*Images can appear differently on every screen*
**Slight color variation may exist and may not be identical to what is seen on your monitor**
True Neon Colors are not able to be achieved and increased color shift might occur.
Application Instructions
- For BEST results requires the use of a COMMERCIAL grade heat press with 60 LB (Heavy) Pressure
- Hot Peel DTF Transfers
- Pre-Press: 5-10 seconds
- Polyester: 275F for 10 seconds
- TriBlend: 275F for 10 seconds
- 50/50: 300F for 12 seconds
- Cotton: 325F for 15 seconds
- Allow to sit ~5 seconds off heat before peeling
- Post-Press: Use Kraft paper for 10 seconds
