Our Process, Build A Sheet, Use Our Site

• How do know which size images I should use?
  We have a garment design size chart here: Garment Design Size.

• How do I export my images and in what formats?
  We have a short visual guide here: How to Export Graphics & Gang Sheets.

• Preparation
  Always pre-press the garment for 5–8 seconds to remove moisture and wrinkles.
  Use a centering tool or the "three-finger rule" from the collar for placement.

• Pressing
  Unlike vinyl, DTF requires medium-to-heavy pressure (around 60 PSI) to drive the adhesive into the fibers.
  Standard settings are usually 300°F–325°F (150°C–165°C) for 12–15 seconds, but always test a small corner if you're switching materials.
  
• Peeling
  Peel smoothly in one continuous motion at a low angle .
  Press the design a second time for 5 seconds with a Teflon sheet or parchment paper. This "sets" the print and removes the excess shine.
  
• Care & Washing
  Always wash the garment inside out in cold water.
  Tumble dry on low heat or hang dry. High heat in the dryer is the #1 cause of issues.

• Preparation
• Peeling
• Permanence/Care

Coming from Photo Editors/Design Apps:

• Specifications for creating print-ready artwork
  

Coming from Canva:

• Export graphics from Canva at 300dpi
• Exporting Gang Sheets from Canva